Dakota Digital VM 150 User Manual

VM-150 Victory installation kit for MCL-5000 Series gauges

VM-170 Victory installation kit for MCV-7000 Series gauges

Kit includes:

(1) Wiring harness

(1) Turn signal cross-over harness

(1) Mounting bracket

(2) Socket head screws with nuts

Removing the original gauge:

Remove the headlight retaining ring and the headlight

to expose the wiring harness.

Unplug white 4-pin connector and remove the original

speedometer wiring harness.

Remove the stock speedometer and the speedometer

mounting bracket. There are two bolts on the front and

two bolts on the bottom.

Unplug the two black 4 pin connectors to the original

indicator panel.

Installing the new gauge:

Using the four original bolts and

spacers, attach the new mounting

bracket.

Remove the back plate from the MCL-

5000 or MCV-7000 Dakota Digital

gauge and plug in the supplied wire

harness.

Replace the back plate on the gauge.

Attach the gauge to the new bracket

using the supplied socket head screws

and nuts.

Route the new gauge harness into the

headlight bucket.

Manual #650372