Gateway Network Router PRMPH User Manual

Using the Gateway PRMPH Port  
Replicator  
The optional port replicator gives you a convenient way to attach external  
devices such as a monitor, a full-size keyboard, or an AC adapter.  
Although devices can be attached directly to the ports on your notebook, the  
port replicator lets you make all of those connections in one step. The port  
replicator also gives you access to additional ports not found on your notebook.  
Read this guide to learn:  
Where ports and jacks are located  
How to connect and disconnect the port replicator  
How to secure the port replicator with a locking cable  
1
 
Back  
Universal jack 3  
Universal jack 1  
Universal jack 5  
Monitor  
port  
USB  
ports  
Ethernet  
jack  
Power  
connector  
Serial  
port  
PS/2 mouse port  
Universal jack 4  
S-Video  
out jack  
Parallel  
port  
Modem S/PDIF  
jack digital  
audio  
PS/2 keyboard port  
jack  
Universal jack 2  
Component  
Icon  
Description  
USB ports  
Plug USB (Universal Serial Bus) devices (such as a USB  
Iomega™ Zip™ drive, printer, scanner, camera,  
keyboard, or mouse) into these ports.  
Monitor port  
Serial port  
Plug an analog VGA monitor into this port.  
Plug a serial device (such as a digital camera) into this  
port.  
Ethernet jack  
Plug a 10/100/1000 Ethernet network cable into this jack.  
3
 
Component  
Icon  
Description  
Universal jack 1  
(blue plug)  
This jack is user configurable for one of the following:  
Off (Default)  
Stereo in: an external audio input source (such as a  
stereo) can be plugged into this jack so that you can  
record sound on your notebook or play sound through  
your notebook speakers.  
Stereo out: an amplified external audio device (such  
as a stereo) can be plugged into this jack so you can  
play your notebook audio through that device.  
Important: Stereo out can be configured as Stereo  
Left/Right, Center/Subwoofer, and Surround  
Left/Right.  
For information on configuring this jack, see your user’s  
guide.  
Universal jack 3  
(green plug)  
This jack is user configurable for one of the following:  
-1  
Headphone: headphones or amplified speakers can  
be plugged into this jack. The built-in speakers are  
turned off when speakers or headphones are plugged  
into this jack.  
Important: A headphone can only be plugged into this  
jack or universal jack 2 on your notebook.  
Off  
Stereo in: an external audio input source (such as a  
stereo) can be plugged into this jack so that you can  
record sound on your notebook or play sound through  
your notebook speakers.  
Stereo out: an amplified external audio device (such  
as a stereo) can be plugged into this jack so you can  
play your notebook audio through that device.  
Important: Stereo out can be configured as Stereo  
Left/Right (Default), Center/Subwoofer, and Surround  
Left/Right.  
For information on configuring this jack, see your user’s  
guide.  
4
 
Component  
Icon  
Description  
Universal jack 5  
(orange plug)  
This jack is user configurable for one of the following:  
-3  
Off  
Stereo in: an external audio input source (such as a  
stereo) can be plugged into this jack so that you can  
record sound on your notebook or play sound through  
your notebook speakers.  
Stereo out: an amplified external audio device (such  
as a stereo) can be plugged into this jack so you can  
play your notebook audio through that device.  
Important: Stereo out can be configured as Stereo  
Left/Right, Center/Subwoofer (Default), and Surround  
Left/Right.  
For information on configuring this jack, see your user’s  
guide.  
Power connector  
PS/2 mouse port  
Plug the AC adapter cable into this connector.  
Plug a Personal System/2 (PS/2) mouse into this port.  
Attaching a PS/2 mouse to your port replicator may  
deactivate the touchpad.  
PS/2 keyboard port  
Plug a Personal System/2 (PS/2) keyboard into this port.  
Attaching a PS/2 keyboard to your port replicator may  
deactivate the built-in keyboard.  
S-Video out jack  
Parallel port  
Plug a standard S-Video cable into this jack and the jack  
on an S-Video device (such as a television or VCR).  
Plug a parallel device (such as a printer) into this port.  
Modem jack  
Plug a modem cable into this jack.  
S/PDIF digital audio jack  
Plug an optical (Toslink) AC-3 digital audio cable into this  
jack.  
5
 
Component  
Icon  
Description  
Universal jack 2  
(pink plug)  
This jack is user configurable for one of the following:  
Microphone: a microphone can be plugged into this  
jack (Default).  
Important: A microphone can only be plugged into this  
jack or universal jack 1 on your notebook.  
Off  
Stereo in: an external audio input source (such as a  
stereo) can be plugged into this jack so that you can  
record sound on your notebook or play sound through  
your notebook speakers.  
Stereo out: an amplified external audio device (such  
as a stereo) can be plugged into this jack so you can  
play your notebook audio through that device.  
Important: Stereo out can be configured as Stereo  
Left/Right, Center/Subwoofer, and Surround  
Left/Right.  
For information on configuring this jack, see your user’s  
guide.  
Universal jack 4  
(black plug)  
This jack is user configurable for one of the following:  
-2  
Off  
Stereo in: an external audio input source (such as a  
stereo) can be plugged into this jack so that you can  
record sound on your notebook or play sound through  
your notebook speakers.  
Stereo out: an amplified external audio device (such  
as a stereo) can be plugged into this jack so you can  
play your notebook audio through that device.  
Important: Stereo out can be configured as Stereo  
Left/Right, Center/Subwoofer, and Surround Left/Right  
(Default).  
For information on configuring this jack, see your user’s  
guide.  
6
 
Connecting to the port replicator  
You can attach your notebook to the port replicator while your notebook is  
off, on, or in Standby mode.  
Attaching to the port replicator  
To attach your notebook to the port replicator:  
1 Connect external devices to the ports on the port replicator.  
2 Align the connector holes on the bottom of your notebook with the  
docking posts on the port replicator.  
3 Press down on your notebook until it snaps into place.  
Warning  
Press down on the outside edges of your notebook. Do  
not press in the middle or you may damage the LCD  
screen.  
Important  
Your notebook may detect additional devices and add  
drivers after being attached to the port replicator. This  
process must be completed for components to work  
correctly. Follow any on-screen instructions, if necessary.  
7
 
Disconnecting from the port replicator  
You can separate your notebook from the port replicator while your notebook  
is off or on (not in Standby or Hibernate mode).  
To separate your notebook from the port replicator:  
1 If your notebook is off, go to Step 2.  
-OR-  
If your notebook is on and using Windows XP, click Start, then click Undock  
Computer. The Undock Computer menu item appears in the Start menu  
only while your notebook is docked.  
-OR-  
If your notebook is on and using Windows 2000, click Start, then click Eject  
PC. The Eject PC menu item appears in the Start menu only while your  
notebook is docked.  
2 Press down on the docking release latch. Your notebook will spring up  
slightly.  
3 Lift your notebook off of the port replicator.  
8
 
 
Securing your port replicator  
You can secure your notebook and port replicator to an object by using the  
security ring located on the left side of the port replicator and the Kensington  
lock slot located on the left side of your notebook.  
To secure your notebook and port replicator:  
1 Open the security ring on the port replicator.  
2 Attach your notebook to the port replicator.  
3 Secure one end of the Kensington cable to a solid object, then run the other  
end of the cable through the security ring and lock it into the slot provided  
on the left side of your notebook.  
9
 
 
Safety, Regulatory, and Legal Information  
United States of America  
Telecommunications per FCC part 68  
(applicable to products fitted with USA modems)  
Your modem complies with Part 68 of the Federal Communications Commission (FCC) rules. On  
the computer or modem card is a label that contains the FCC registration number and Ringer  
Equivalence Number (REN) for this device. If requested, this information must be provided to the  
telephone company.  
An FCC-compliant telephone line cord with a modular plug is required for use with this device.  
The modem is designed to be connected to the telephone network or premises wiring using a  
compatible modular jack which is Part 68-compliant. See installation instructions for details.  
The Ringer Equivalence Number (REN) is used to determine the number of devices which may be  
connected to the telephone line. Excessive RENs on a telephone line may result in the devices not  
ringing in response to an incoming call. In most areas, the sum of RENs should not exceed five  
(5.0). To be certain of the number of devices that may be connected to a line, as determined by the  
total RENs, contact the local telephone company.  
If this device causes harm to the telephone network, the telephone company will notify you in  
advance that temporary discontinuance of service may be required. The telephone company may  
request that you disconnect the equipment until the problem is resolved.  
The telephone company may make changes in its facilities, equipment, operations, or procedures  
that could affect the operation of this equipment. If this happens, the telephone company will  
provide advance notice in order for you to make necessary modifications to maintain  
uninterrupted service.  
This equipment cannot be used on telephone company-provided coin service. Connection to party  
line service is subject to state tariffs. Contact the state public utility commission or public service  
commission for information.  
When programming or making test calls to emergency numbers:  
Remain on the line and briefly explain to the dispatcher the reason for the call.  
Perform such activities in the off-peak hours such as early morning or late evenings.  
The United States Telephone Consumer Protection Act of 1991 makes it unlawful for any person to  
use a computer or other electronic device to send any message via a telephone fax machine unless  
such message clearly contains, in a margin at the top or bottom of each transmitted page or on the  
first page of the transmission, the date and time it is sent, an identification of the business, other  
entity, or other individual sending the message, and the telephone number of the sending  
machine or such business, other entity, or individual. Refer to your fax communication software  
documentation for details on how to comply with the fax-branding requirement.  
10  
 
Canada  
Telecommunications per Industry Canada CS-03  
(for products fitted with an IC-compliant modem)  
The Industry Canada label identifies certified equipment. This certification means that the  
equipment meets certain telecommunications network protective, operation, and safety  
requirements. The Department does not guarantee the equipment will operate to the users’  
satisfaction.  
Before installing this equipment, users should make sure that it is permissible to be connected to  
the facilities of the local telecommunications company. The equipment must also be installed  
using an acceptable method of connection. In some cases, the inside wiring associated with a  
single-line individual service may be extended by means of a certified connector assembly. The  
customer should be aware that compliance with the above conditions may not prevent  
degradation of service in some situations.  
Repairs to certified equipment should be made by an authorized Canadian maintenance facility  
designated by the supplier. Any repairs or alterations made by the user to this equipment, or  
equipment malfunctions, may give the telecommunications company cause to request the user to  
disconnect the equipment.  
Users should make sure, for their own protection, that the electrical ground connections of the  
power utility, telephone lines, and internal metallic water pipe system, if present, are connected  
together. This precaution may be particularly important in rural areas.  
Warning  
To avoid electrical shock or equipment malfunction do not  
attempt to make electrical ground connections by yourself.  
Contact the appropriate inspection authority or an  
electrician, as appropriate.  
The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of  
the maximum number of terminals allowed to be connected to a telephone interface. The  
termination on an interface may consist of any combination of devices subject only to the  
11  
 
Additional information  
See your user’s guide for additional technical support, safety, regulatory, and  
legal information.  
© 2003 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the  
black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. in the United States and  
other countries. All other brands and product names are trademarks or registered trademarks of their respective  
companies.  
MAN M675 PORTREPLICATOR GDE R0 11/03  
12  
 

Exergen Thermometer Instant Thermometry User Manual
Extron electronic Network Card Cable Cubby 200 User Manual
Extron electronic Network Card DAS101CM User Manual
Extron electronic Power Supply PS 124 User Manual
FireplaceXtrordinair Indoor Fireplace 36A BI User Manual
Fitness Quest Home Gym 4100HR A User Manual
Fujitsu Universal Remote IRMC S2 S3 User Manual
GE Portable Generator G30 User Manual
GE Water System GXUL30Z User Manual
Gitzo Camcorder Accessories G1327 User Manual