GE Universal Remote 24999 User Manual

24999  
Universal Remote  
Instruction Manual  
 
Introduction  
Congratulations.on.your.purchase.of.this.24999.Universal.Remote.  
Control..It.is.one.of.the.most.unique.looking,.and.easy.to.use.remote.  
controls.available.today..Its.stylish.looking.blue.backlight,.and.metallic.  
keypad.is.like.no.other.remote..With.the.24999.juggling.multiple.remote.  
controls.is.a.thing.of.the.past!.Your.24999.Universal.Remote.controls.  
up.to.8.devices,.including.the.most.popular.brands.of.TV,.VCR,.DVD,.SAT,.  
CBL,.and.audio.equipment..  
Note:.Some.functions.from.your.original.remote.may.not.be.controlled.  
by.the.24999.remote..Use.the.original.remote,.if.available,.to.control.  
such.functions..Sometimes.buttons.other.than.described.in.these.  
instructions.may.actually.perform.the.function..For.example,.the.CHAN.  
and.VOL.buttons.might.be.used.to.navigate.through.menu.choices..  
We.recommend.you.experiment.with.the.remote.to.identify.if.such.  
situations.pertain.to.your.equipment..  
The.24999.Universal.Remote.is.easy.to.use,.easy.to.program,.and.it.  
gives.you.total.control—at.the.touch.of.your.fingertips!  
3
 
Button Functions  
1.  
26.  
25.  
24.  
23.  
22.  
21.  
20.  
19.  
18.  
17.  
16.  
15.  
14.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
10.  
11.  
12.  
13.  
Note:.The.REC button.must.be.pressed.TWICE.to.record.from.your.  
device..For.some.brands.of.VCRs,.you.might.need.to.press.the.REC  
button.once,.then.press.it.again.for.three.seconds.  
Some.buttons.on.the.remote.might.have.functions.that.are.referred.  
to.by.different.names.on.the.device.you.are.controlling..E.G..LAST.may.  
be.called.RECALL,.or.ENTER may.be.called.DISPLAY..These.differences.  
depend.on.the.brand.and.model.of.your.product..Also,.this.remote.can.  
only.operate.features.that.exist.on.your.product..E.G.,.your.product.  
must.have.LAST.ability.for.the.LAST button.to.operate.this.feature.  
4
 
Button Functions, cont.  
1. Liquid Crystal Display (LCD): Helps.with.setup.and.displays.the.  
Mode.the.remote.is.in,.and.time,.etc.  
2. SETUP: Used.for.setting.up.your.remote.  
3. TV, DVD, DVR, etc.:.Selects.product.to.be.operated.  
4. EXIT:.Exits.On-Screen.Menus/Returns.to.previous.On-Screen.  
selection.  
5. Dot:.Used.for.digital.channels,.e.g..2.3..  
6. MENU: Brings.up.the.device.Menu.screen.(if.available).-.use.with.  
UP,.DOWN,.LEFT,.and.RIGHT navigation.buttons.  
7. MUTE: Turns.off.the.TV.sound.while.the.picture.remains.  
8. . UP,.DOWN,.LEFT &.RIGHT: Navigation.buttons.  
9. VOLUME UP/DOWN: Changes.the.volume.level.of.the.product,.  
normally.the.TV.  
10. OK: Selects.menu.items.for.the.device.you.are.controlling.  
11. ABCD buttons:.Used.to.store.learned.commands.  
12.. REPLAY: On.some.DVRs,.this.button.replays.the.last.8.seconds.of.a.  
program.  
13.. PAGE DOWN: Sets.your.Favorites.ratings,.and.moves.one.screen.  
down.at.a.time.in.guides.and.menus.  
14. RECORD, PLAY, STOP, REW, FF, PAUSE:.Control.buttons.that.  
operate.your.DVD/DVR.even.when.the.remote.is.set.to.operate.the.  
TV..Also.operates.DVD.Scan.-/+.  
15. LIVE:.Returns.to.live.TV.  
16.. PAGE UP:.Sets.your.Favorites.ratings,.and.moves.one.screen.up.at.  
a.time.in.guides.and.menus.  
17. INPUT: For.some.TVs,.press.repeatedly.to.select.available.viewing.  
sources.(antenna,.cable.box,.VCR,.DVD,.etc.).  
18. DVR List:.Press.to.display.list.of.recorded.shows.on.your.DVR.  
19. CHANNEL UP/DOWN: Changes.the.channels..Also.controls.DVD/  
CD.CHAPTER.+/-.track.selection,.i.e.,.DVD/CD.Track.Skip.Up/Down..  
Note.the.DVR buttons.also.control.the.DVD.when.in.DVD.Mode.  
20. LAST:.Returns.to.the.previously.selected.channel,.or.DVD.repeat.  
toggle..  
21. INFO: Displays/selects.on-screen.channel.information.  
22. GUIDE:.Displays.on-screen.program.or.channel.guides.  
23. ENTER:.Used.after.direct.channel.number.entry.to.immediately.  
change.to.the.selected.channel.  
24. NUMBERS:.Enter.numbers.for.direct.channel.selection..Some.  
products.require.Enter.to.be.pressed.after.channel.selection.  
25. ASPECT: Aspect.Ratio.Control.selects.viewing.format.for.the.  
displayed.picture,.e.g.,.Wide,.Zoom,.etc.  
26. POWER: Turns.device.on.or.off.  
DVD/DVR Punch-Through Feature  
This.remote.allows.the.6.DVD/DVR.transport.buttons.(i.e.,.PLAY,.PAUSE,.  
STOP,.FF,.REWIND,.and.REC).to.operate.the.programmed.TV,.DVD,.  
SAT,.DVR,.Cable.device.if.the.code.has.these.button.functions.e.g..if.  
you.have.programmed.a.SAT/DVR.or.Cable/DVR,.etc..Otherwise.the.  
transport.keys.will.punch-through.to.the.last.DVD.or.VCR.programmed.  
mode.you.used,.i.e.,.the.transport.buttons.control.your.DVD.or.VCR.  
player.even.when.you.are.in.TV,.SAT.or.Cable.mode.  
5
 
Setup  
Battery Installation  
1..On.the.back.of.the.remote,.push.down.on.the.  
tab.and.lift.the.cover.off.  
2..Match.the.batteries.to.the.+.and.-.marks.inside.  
the.battery.case,.then.insert.2.AAA.Alkaline.  
batteries.  
3..Press.the.battery.cover.back.into.place.  
Battery Saver  
Your.remote.automatically.turns.off.if.the.buttons.  
are.depressed.more.than.30.seconds..This.will.  
save.your.batteries.should.your.remote.get.stuck.  
in.a.place.where.the.buttons.remain.depressed.  
(e.g.,.between.the.sofa.cushions).  
Code Saver  
All.user.programmed.settings,.except.Time,.Day,.and.Date.will.be.stored.  
in.permanent.memory.while.you.are.changing.batteries,.so.you.will.not.  
lose.any.codes.stored.in.the.remote.while.you.are.changing.batteries..  
Time,.Day,.and.Date,.will.be.cleared.to.the.factory.defaults.when.the.  
batteries.are.replaced.  
Power-On Default  
The.remote.powers.on.in.TV.mode.  
Liquid Crystal Display (LCD).  
The.LCD.lets.you.see.at.a.glance.what.mode.the.remote.is.in..It.also.  
includes.a.clock.that.displays.the.time.and.day,.and.a.visual.indication.  
that.the.remote.is.transmitting.when.you.press.a.button.  
Code Setup  
The.SETUP.button.is.used.to.setup.the.remote..You.can.either.setup.the.  
remote.using.the.code.for.your.brand.of.product,.from.the.code.tables.  
(on.separate.sheet),.or.you.can.search.through.the.library.of.codes.until.  
you.find.a.code.that.works.for.your.product.  
You.can.store.any.kind.of.code.under.any.mode.(except.TV)..I.E..you.can.  
store.a.VCR.code.under.the.CBL button,.or.a.DVD.code.under.the.VCR  
button,.etc..However,.you.can.only.store.TV.codes.under.the.TV button.  
The SETUP button.is.used.for.programming.the.remote.and.accessing.  
any.additional.features.-.e.g..Shifted.functions,.see.below..To.enter.setup.  
mode,.press.and.hold.the.SETUP button.until.“CODE.SETUP”.appears.in.  
the.display..The.“SET”.symbol.will.always.be.shown.when.the.remote.is.  
in.Setup..Successive.presses.of.the.SETUP button.shows.available.Setup.  
options.in.the.order.shown.below..  
1..CODE.SETUP.–.press.OK here.to.program.a.Mode.e.g..Code.Entry,.  
Search,.etc..See.Code.Setup.options.below.  
2..SYSTEM.SETUP.–.press.OK here.to.set.Time,.Date,.Volume.Control,.etc..  
3..TIMER.SETUP.–.press.OK here.to.set.Timer.events.  
4..LEARN.SETUP.–.press.OK here.to.program.a.Mode.with.Learned.  
commands.  
5..EXIT.SETUP.–.press.OK here.to.Exit.Setup.routines.and.return.to.  
normal.operation.  
Press.OK to.select.the.desired.programming.step.required..  
Exit.from.Setup.occurs.automatically.after.approximately.15.seconds.if.  
no.buttons.is.pressed..TIME.OUT.is.displayed.  
When.the.remote.is.busy.processing.in.Setup.routines,.“Please.Wait”.is.  
displayed.  
6
 
Setup, cont.  
Setup Screen Navigation.Use.the.SETUP,.OK,.and.Up,.Down,.Left.and.  
Right.navigation.buttons.for.Setup.screen.navigation.and.selection..  
To.exit.the.Setup.routines.and.return.to.normal.operation,.press.the.  
EXIT button.or.navigate.to.the.“EXIT.SETUP”.screen.and.press.OK..  
Completion.of.some.Setup.routines.will.automatically.return.the.remote.  
to.normal.operation.  
Mode button press Display.Pressing.and.holding.a.Mode.button.  
changes.to.that.Mode.and.displays.the.active.Mode.and.its.code,.e.g.,.  
DVD.and.the.programmed.4-digit.code.e.g.,.0768..The.display.returns.to.  
normal.when.you.release.the.button.  
SETUP (Shift) Display.Pressing.and.releasing.the.Setup.button.displays.  
the.active.Mode.of.the.remote.e.g..DVD,.the.Date.e.g..3:26.(Month:Day).  
and.indicates.“Shift”.operation.with.“(S)”..Press.and.release.Exit.to.return.  
to.normal.display..To.use.the.SETUP button.for.Shift.-.Press.and.release.  
SETUP followed.by.the.desired.secondary.function.button.  
7
 
Code Entry  
Code Setup Options:.Pressing.OK at.the.CODE.SETUP.screen.presents.  
3.options.for.programming.a.Mode.with.codes..These.are.LIST.CODES.  
(lets.you.enter.a.4.digit.code.from.the.on-screen.code.list),.ENTER.CODES,.  
(lets.you.enter.a.4.digit.code.directly.from.the.printed.code.list).SEARCH.  
CODES,.(lets.you.search.through.the.codes.stored.in.the.remote.to.find.  
the.correct.one.for.your.device).  
Code Entry using On-screen Code List  
1..Manually.turn.on.the.device.to.be.controlled.  
2..Press.and.hold.the.SETUP button.until.CODE.SETUP.is.displayed.  
(takes.about.3.seconds),.then.release.the.SETUP button.  
3..Press.and.release.OK..LIST.CODES.is.displayed.  
4..Press.and.release.OK..MODE.KEY?.is.displayed.  
5..Press.and.release.the.desired.mode.button.(TV,.VCR,.DVD,.etc.)..The.  
Mode.is.displayed.along.with.its.currently.programmed.code..  
6..Using.the.UP/DOWN.buttons,.select.the.Device.type.to.be.  
programmed.(TV,.VCR,.DVD,.etc..Note - For TV Mode, only a TV  
Device can be selected.  
7..Press.and.release.OK to.confirm.selection..  
8..The.Code.List.Brand.and.Code.will.now.be.displayed.(e.g..Admiral.  
0000)..Use.the.UP/DOWN.buttons.to.select.the.Brand.and.LEFT/  
RIGHT.buttons.to.select.the.Code..Codes.can.be.tested.on.your.  
device.using.VOLUME, MUTE, CHANNEL, POWER, INPUT, PLAY,  
STOP, FF, REWIND and.PAUSE. Once.the.correct.code.has.been.  
found,.press.and.release.OK to.install.the.Code..  
9..PLEASE.WAIT.is.briefly.displayed,.followed.by.SUCCESS.and.the.  
remote.returns.to.normal.operation..  
10..With.your.device.on,.press.CHANNEL UP..If.the.device.responds,.  
no.further.programming.is.required..Note:.If.some.buttons.do.not.  
operate.your.equipment,.try.one.of.the.other.codes.for.your.brand.  
of.device..  
Direct Code Entry  
1..Manually.turn.on.the.device.to.be.controlled.  
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.  
(takes.about.3.seconds),.then.release.the SETUP.button.  
3..Press.and.release.OK..LIST.CODES.is.displayed.  
4..Press.the.DOWN navigation.button.until.ENTER.CODES.is.displayed..  
5..Press.and.release.OK..MODE.KEY?.is.displayed.  
6..Press.and.release.the.desired.mode.button.(TV, VCR,.DVD,.etc.)..The.  
Mode.is.displayed.along.with.its.currently.programmed.code.  
7..Enter.the.4.digit.code.from.the.code.tables.(on.separate.sheet)..After.  
the.4th.digit.is.entered.SUCCESS.is.displayed.and.the.remote.returns.  
to.normal.operation..  
If.an.invalid.code.is.entered,.CODE.ERROR.is.shown.in.the.display.and.  
the.remote.returns.to.normal.operation..  
8..With.your.device.on,.press CHANNEL UP..If.the.device.responds,.  
no.further.programming.is.required..Note:.If.some.buttons.do.not.  
operate.your.equipment,.try.one.of.the.other.codes.for.your.brand.  
of.device.  
8
 
Code Entry, cont.  
Searching for Codes  
If.your.product.does.not.respond.after.you.have.tried.all.the.codes.for.  
your.brand,.or.if.your.brand.is.not.listed,.try.searching.for.your.code.by.  
following.these.steps.  
1..Manually.turn.on.the.device.(TV,.VCR,.DVD,.etc.).to.be.controlled.  
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.  
(takes.about.3.seconds),.then.release.the SETUP.button.  
3..Press.and.release.OK..LIST.CODES.is.displayed.  
4..Press.the.down.navigation.button.repeatedly.until.SEARCH.CODES.is.  
displayed.  
5..Press.and.release.OK..MODE.KEY.is.displayed.  
6..Press.and.release.the.desired.mode.button.(TV, VCR,.DVD,.etc.)..  
DEVICE?.TV.is.displayed.  
7..Using.the.Up/Down.keys,.select.the.Device.type.to.be.programmed.  
(TV,.VCR,.DVD,.etc..Note - For TV Mode, only a TV Device can be  
selected.  
8..Press.and.release.OK to.confirm.selection..SEARCH.KEY?.is.displayed..  
9..Press.the.CHANNEL UP.button.(or.POWER,.or.PLAY for.VCRs/  
DVDs).repeatedly.(up.to.300.times).until.the.Device.to.be.controlled.  
changes.channel,.turns.off.or.responds.accordingly..SEARCHING.  
is.displayed.(along.with.the.Device.selection).during.the.search.  
process..If.the.desired.Code.is.accidentally.passed.then.press.the.  
CHANNEL DOWN.button.to.backtrack.through.the.Library..Press.  
CHANNEL UP.(or.POWER.or.PLAY).to.change.direction.forward.again..  
10..Press.and.release.OK to.install.the.Code..PLEASE.WAIT.is.briefly.  
displayed,.followed.by.SUCCESS.and.the.remote.returns.to.normal.  
operation.  
Notes:  
1..If.the.Device.does.not.have.a.CHANNEL UP button,.use.PLAY (VCR/DVD).  
or.the.POWER button.instead.  
2..Code.Search.starts.from.the.currently.stored.4-digit.number.under.  
that.Mode.  
3..When.all.codes.have.been.searched.SEARCH.END.is.displayed.and.  
remote.returns.to.normal.operation.  
Code Identification Feature  
Press.and.hold.the.respective.Mode.key.in.normal.operation.to.display.  
the.programmed.code.for.that.Mode.e.g.,.DVD.Code.0768.  
Programming Combo Device Codes  
Some.combo.(combination).devices.(TV/DVR,.TV/DVD,.DVD/DVR,.etc.).  
require.you.to.set.up.2.different.modes.to.control.both.parts.of.the.  
combo..For.example,.if.you.have.a.TV/DVD.combo,.you.might.need.to.  
set.up.one.code.under.the.TV.mode.to.control.the.TV.and.a.separate.  
code.(under.other.modes).to.control.the.DVD.  
9
 
Setup, cont.  
System Setup Options  
Pressing.OK at.the.SYSTEM.SETUP.screen.accesses.the.System.Setup.  
Options.for.Volume.Punch-Through.control.Setup,.Time.Setup,.Date.Setup,.  
Backlight.Setup.and.System.Reset.  
Volume/Mute Control and Punch-Through Feature  
Your.remote.allows.you.to.select.which.device.mode.controls.VOLUME.  
and.MUTE..This.remote.is.initially.set.for.all.device.modes.to.use.their.  
own.Volume/Mute.control.if.present..If.the.programmed.code.does.not.  
have.Volume/Mute.operation,.then.VOLUME.and.MUTE.will.“punch-  
through”.(hand-over).control.to.the.TV.mode.device.without.you.  
needing.to.change.to.TV.mode..Note:.Any.mode.chosen.for.Volume/  
Mute.control.must.have.its.own.Volume/Mute.function.or.else.VOLUME.  
and.MUTE.will.not.function.  
Setting ALL Volume/Mute Control to any one Mode (ALL VOL. SET)  
This.routine.can.set.all.Modes.to.“punch-through”.to.any.one.chosen.  
Mode.for.Volume/Mute.button.control.without.needing.to.change.to.  
that.Mode.  
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.  
(takes.about.3.seconds),.then.release.the SETUP.button.  
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..  
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.  
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.  
5..Press.and.release.OK..ALL.VOL..MODE?.is.displayed.  
6..Press.and.release.desired.Mode.key.(TV,.VCR,.DVD,.etc.).for.Volume/  
Mute.control..PLEASE.WAIT.is.briefly.displayed,.followed.by.SUCCESS.  
and.the.remote.returns.to.normal.operation.  
All.Modes.will.now.punch-through.to.your.chosen.Mode.for.Volume/  
Mute.control..If.the.chosen.Mode.has.no.Volume/Mute.commands.of.its.  
own,.“Volume.Error”.is.shown.in.the.display.and.the.remote.returns.to.  
normal.operation..  
Setting any Mode to use its own Volume/Mute Control (MODE VOL.  
SET)  
This.sets.any.Mode.to.use.only.its.own.Volume/Mute.control,.i.e..  
Volume/Mute.punch-through.is.disabled.for.this.Mode..Note.-.If.your.  
chosen.Mode.has.no.Volume/Mute.functions.of.its.own.then.the.  
Volume/Mute.buttons.will.do.nothing.  
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.  
(takes.about.3.seconds),.then.release.the SETUP.button.  
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..  
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.  
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.  
5..Press.the.down.navigation.button.until.MODE.VOL..SET.is.displayed.  
6..Press.and.release.OK..MODE.VOL..MODE?.is.displayed.  
7..Press.and.release.desired.Mode.key.(TV,.VCR,.DVD,.etc.).to.be.disabled.  
for.Volume/Mute.punch-through.control..PLEASE.WAIT.is.briefly.  
displayed,.followed.by.SUCCESS.and.the.remote.returns.to.normal.  
operation.  
The.chosen.Mode.will.now.use.its.own.Volume/Mute.control.  
10  
 
Setup, cont.  
Resetting Volume/Mute Control to Factory Defaults (VOL/MUTE  
RESET) This.resets.Volume/Mute.control.back.to.its.Factory.default.  
settings..  
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.  
(takes.about.3.seconds),.then.release.the SETUP.button.  
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..  
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.  
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.  
5..Press.the.down.navigation.button.repeatedly.until.VOL/MUTE.RESET.  
is.displayed.  
6..Press.and.release.OK..CONFIRM.RESET.is.displayed.  
7..Press.and.release.OK..PLEASE.WAIT.is.briefly.displayed,.followed.by.  
SUCCESS.and.the.remote.returns.to.normal.operation.  
Volume/Mute.control.is.now.rest.to.its.Factory.default.settings.  
11  
 
Setup, cont.  
Setting the Time of Day (TIME SETUP) To.set.the.Time.of.day.for.normal.  
LCD.time.display..  
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.  
(takes.about.3.seconds),.then.release.the SETUP.button.  
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..  
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.  
4..Press.the.down.navigation.button.until.TIME.SETUP.is.displayed.  
5..Press.and.release.OK..TIME?.is.displayed.showing.current.format.(12.  
or.24.hour).flashing.and.current.time.  
6..Use.the.Up/Down.navigation.buttons.to.set.the.format.(12Hr.or.24Hr).  
then.press.and.release.OK.  
7..The.“hours”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.hours.  
(keep.going.past.12.to.select.PM.hours).then.press.and.release.OK..  
8..The.minutes”.will.be.ashing..Use.the.Up/Down.buttons.to.set.the.  
minutes.then.press.and.release.OK.  
9..SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.  
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.  
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation.  
Setting the Date (DATE SETUP) To.set.the.Month,.Date.and.Day..  
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.  
about.3.seconds),.then.release.the SETUP.button.  
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..  
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.  
4..Press.the.down.navigation.button.repeatedly.until.DATE.SETUP.is.  
displayed..  
5..Press.and.release.OK..YEAR?.is.displayed.with.the.last.2.year.digits.  
flashing..  
6..Use.the.Up/Down.buttons.to.set.the.Year.then.press.and.release.OK.  
7..MONTH?.is.displayed.with.the.Month.digits.flashing..Use.the.Up/Down.  
buttons.to.set.the.Month.then.press.and.release.OK.  
8..DATE?.is.displayed.with.the.Date.digits.ashing..Use.the.Up/Down.  
buttons.to.set.the.Date.then.press.and.release.OK.  
9..DAY?.is.displayed.with.the.Day.flashing..Use.the.Up/Down.buttons.to.  
set.the.Day.then.press.and.release.OK.  
10..SUCCESS.is.displayed,.and.the.remote.remains.in.Setup.Mode,.returning.  
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..  
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.  
operation.  
12  
 
Setup, cont.  
Setting the Backlighting On time (BACKLIGHT SETUP).To.set.the.length.  
of.time.the.Backlighting.remains.on.after.you.stop.pressing.buttons.  
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.  
about.3.seconds),.then.release.the SETUP.button.  
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..  
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.  
4..Press.the.down.navigation.button.repeatedly.until.BACKLIGHT.SETUP.  
is.displayed..Press.and.release.OK.  
5..BACKLIGHT.TIME?.is.displayed.with.the.current.Backlight.On.time.digits.  
flashing..Use.the.Up/Down.buttons.to.set.the.Backlight.On.time.in.  
increments.of.5.seconds.up.to.a.maximum.of.60.seconds..The.default.  
Backlight.On.time.is.10.seconds..To.turn.the.Backlighting.feature.off,.  
set.the.time.to.“00”.(zero)..Press.and.release.OK.  
6..SUCCESS.is.displayed.and.the.remote.remains.in.Setup.Mode,.returning.  
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..  
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.  
operation.  
Reset the LCD Remote to Factory Defaults (SYSTEM RESET) To.reset.  
the.remote.back.to.factory.default.settings..All.User.programmed.  
settings,.e.g..code.settings,.learned.commands,.etc.,.are.cleared.to.their.  
respective.default.settings..  
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.  
about.3.seconds),.then.release.the SETUP.button.  
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..  
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.  
4..Press.the.down.navigation.button.repeatedly.until.SYSTEM.RESET.is.  
displayed..Press.and.release.OK.  
5..CONFIRM.RESET.is.displayed..Press.and.release.OK.  
6..PLEASE.WAIT.is.displayed.while.all.settings.are.Reset.then.the.remote.  
exits.Setup.and.returns.to.normal.operation.  
13  
 
Setup, cont.  
Timer Setup  
Pressing.OK at.TIMER.SETUP.accesses.the.available.Timer.Options..  
These.are.a.TV.Sleep.Timer.and.4.Timers.that.can.send.a.sequence.of.  
up.to.3.key.commands.at.the.preset.time.  
Setting and Clearing a TV Sleep Timer (TV Sleep Setup)  
The.remote.can.be.programmed.with.a.TV.Sleep.Timer..At.the.end.of.  
the.set.Timer.period,.the.remote.sends.the.Power.command.for.the.  
TV.Mode.device..The.TV.Sleep.Timer.can.be.set.for.a.period.of.1-90.  
minutes..The.“Zzz”.symbol.is.displayed.when.a.TV.Sleep.Timer.is.set.  
To set a TV Sleep Timer (no “Zzz” in normal display)  
1..Turn.on.the.TV.Mode.device.  
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.  
about.3.seconds),.then.release.the SETUP.button.  
3..Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.  
displayed..Press.and.release.OK.  
4..TV.SLEEP.SETUP.is.displayed..Press.and.release.OK.  
5..TV.SLEEP.SET.is.displayed..Press.and.release.OK.  
6..TV.SLEEP.TIME?.is.displayed.with.“minutes”.flashing..Use.the.Up/Down.  
buttons.to.set.the.minutes.then.press.and.release.OK.  
7..SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.  
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.  
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation..  
Zzz.is.displayed.on.the.screen.to.indicate.that.a.Sleep.Timer.is.set.  
To clear a TV Sleep Timer (“Zzz” in normal display)  
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.  
about.3.seconds),.then.release.the SETUP.button.  
2..Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.  
displayed..Press.and.release.OK.  
3..TV.SLEEP.SETUP.is.displayed..Press.and.release.OK.  
4..TV.SLEEP.CLEAR.is.displayed..Press.and.release.OK.  
5..CONFIRM.CLEAR.is.displayed..Press.and.release.OK.  
6..SUCCESS.is.displayed.and.the.remote.remains.in.Setup.Mode,.returning.  
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..  
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.  
operation.  
Setting and Clearing Timers (TIMER SETUP)  
The.remote.can.be.programmed.with.up.to.4.Timers.(Timer.1,.2,.3.&.4)..  
Each.Timer.can.be.assigned.up.to.2.keys.to.activate.at.the.set.time..The.  
first.key.must.always.be.a.Mode.key..Subsequent.keys.cannot.include.  
Up,.Down,.Left,.Right,.OK,.Exit,.Setup.or.any.Mode.key..Timers.can.only.  
activate.within.the.following.24-hour.period..Timers.are.automatically.  
cleared.after.activation..The.“Timer.Bell”.symbol.is.displayed.when.any.  
Timer.is.set.  
14  
 
Setup, cont.  
To set a Timer (Note, the Timer must be cleared first if it was previously  
set – see To Clear a Timer below)  
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.  
about.3.seconds),.then.release.the SETUP.button.  
2.. Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.  
displayed..  
3.. Press.and.release.OK..TV.SLEEP.SETUP.is.displayed..  
4.. Press.the.down.navigation.button.until.TIMER.X.SETUP.is.displayed.  
(where.“X”.is.1,.2,.3.or.4)..Press.and.release.OK.  
5.. TIMER.X.SET.is.displayed..Press.and.release.OK.  
6.. TIMER.X.TIME?”.is.displayed.with.the.“hours”.flashing..Use.the.Up/Down.  
buttons.to.set.the.hours.(keep.going.past.12.to.select.PM.times).then.  
press.and.release.OK.  
7.. The.minutes”.will.be.ashing..Use.the.Up/Down.buttons.to.set.the.  
minutes.then.press.and.release.OK.  
8.. TIMER.X.MODE?.is.displayed..Press.and.release.the.desired.Mode.key.  
(TV,.VCR,.DVD,.etc.).  
9.. TIMER.X.Key1?.is.displayed..Press.and.release.the.key.required.(e.g..  
POWER).  
10.. SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.  
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.  
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation..  
A.“Timer.Bell”.is.displayed.on.the.screen.to.indicate.that.a.timer.is.set.  
To clear a Timer (“Timer Bell” in normal display)  
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.  
about.3.seconds),.then.release.the SETUP.button.  
2.. Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.  
displayed..  
3.. Press.and.release.OK..TV.SLEEP.SETUP.is.displayed..  
4.. Press.the.down.navigation.button.until.the.desired.TIMER.X.SETUP.is.  
displayed.(where.“X”.is.1,.2,.3.or.4).screen..Press.and.release.OK.  
5.. TIMER.X.CLEAR.is.displayed..Press.and.release.OK.  
6.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.  
7.. SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.  
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.  
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation.  
15  
 
Code Learning  
Tips On Learning  
You.can.only.learn.one.device.type.under.any.one.Mode.button.e.g..  
only.learn.TV.codes.under.the.TV Mode,.DVD.codes.under.the.DVD  
Mode,.etc..If.you.are.trying.to.learn.from.a.“Universal”.remote,.it.might.  
have.more.than.one.code.type.stored.under.a.Mode..Try.learning.from.  
another.remote.to.see.if.there’s.a.problem.with.the.type.or.brand.of.  
remote.you.are.trying.to.learn.from..  
a. Some functions from some types of remotes might not be able to  
be learned.  
b. No functions may be stored under the SETUP button.  
c. Only one original device type can be learned per individual Mode.  
d. Use.fresh.batteries.for.both.the.Learning.Remote.and.the.Original.  
Remote.  
e. Do.not.attempt.to.Learn.directly.under.an.incandescent.or.  
low-energy.light.as.these.can.cause.interference.with.the.IR.  
transmissions..Keep.at.least.3.feet.away.from.any.such.light.sources.  
f. Perform.a.Master.Clear.(see.page.22).before.learning.and.try.learning.  
2.or.3.commands.initially..Then.carry.out.a.Master.Clear.before.  
completely.learning.your.original.remote’s.commands.  
g..Carry.out.a.“Mode.Clear”.before.learning.a.Mode.to.make.sure.there.  
are.no.previously.learned.commands.for.that.Mode.  
h. Place.the.original.remote.end-to-end.with.the.Learning.Remote.so.  
the.IR.transmitters.on.both.remotes.are.directly.in.line.with.each.  
other..You.may.need.to.adjust.the.height.of.either.remote.to.achieve.  
this..  
i. Keep.the.distance.between.the.two.remotes.to.approximately.1.inch.  
and.do.not.move.or.change.the.distance.between.the.two.remotes.  
until.you.have.learned.all.the.required.buttons.for.that.Mode.  
j. Avoid.learning.your.original.remote.Volume/Mute.buttons.unless.  
you.are.sure.these.operate.the.same.device.e.g..some.original.DVD.  
remotes.include.TV.Volume/Mute.button.control.and.can.be.two.  
different.types.of.code.  
k. Avoid.learning.your.original.remote.VCR.or.DVD.buttons.unless.  
you.are.sure.these.operate.the.same.device.e.g..some.original.TV.  
remotes.include.VCR.or.DVD.button.control.and.can.be.two.different.  
types.of.code.  
l..Learning.a.button.can.take.up.to.3.seconds..Do.not.release.the.button.  
being.Learned.until.SUCCESS.or.LEARN.ERROR.has.been.displayed.  
16  
 
Tips On Learning, cont.  
Tips On Learning, cont.  
m. If.learning.the.first.or.second.buttons.for.a.Mode.results.in.  
continuous.errors.then.try.the.following:  
i... End.the.Learn.session.by.pressing.the.EXIT button.  
ii...Clear.out.the.learned.commands.for.that.Mode.  
iii...Check.the.IR.transmitters.are.correctly.aligned.between.the.two.  
remotes.  
iv...Adjust.the.distance.between.the.two.remotes.to.be.closer.(e.g..  
half.an.inch).or.a.further.away.(e.g..2.inches).from.each.other.  
v...Try.learning.the.original.remote.for.that.Mode.again.  
If.problems.reoccur.with.the.same.button.check.the.original.remote.  
button.being.learned.–.does.it.transmit?.Does.it.operate.the.target.  
device?.Try.learning.that.button.under.a.different clear.Mode..If.it.learns.  
okay.then.it.is.likely.to.be.a.different.code.type.from.the.others.and.  
cannot.be.learned.under.the.same.Mode.  
Learning Notes  
1.. You.cannot.learn.under.the.Setup.button.  
2.. All.learned.commands.for.a.Mode.are.deleted.if.the.same.or.a.new.  
4-digit.code.is.entered.for.that.Mode.by.any.Code.Entry.or.Code.  
Search.  
3.. The.Backlighting.is.turned.off.for.Learning.  
17  
 
Learning Commands  
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.  
about.3.seconds),.then.release.the SETUP.button.  
2..Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.  
displayed..Press.and.release.OK.  
3..MODE.LEARN.is.displayed..Press.and.release.OK.  
4..MODE.KEY?.is.displayed..Press.and.release.the.desired.Mode.button.  
(TV,.VCR,.DVD,.etc.).  
5..LEARN.KEY?.is.displayed..Press.and.release.the.key.on.the.24999.remote.  
that.you.want.to.be.taught.a.code,.e.g..POWER.  
6..LEARNING.is.displayed..Pointing.the.remotes.as.shown.below,.press.  
and.hold.the.original.remote.key.(e.g..POWER).until.the.SUCCESS.or.  
LEARN.ERROR.is.displayed.(see.Tips.on.Learning,.page.19).followed.by.  
LEARN.MORE?.(this.process.can.take.up.to.2.or.3.seconds.to.complete)..  
Release.the.original.remote.button.  
7..LEARN.MORE?.is.still.displayed..To.learn.more.buttons,.press.and.release.  
OK and.repeat.from.step.5..To.exit.at.this.point,.press.and.release.EXIT.  
8..PLEASE.WAIT.is.displayed.briefly.and.the.remote.exits.Setup.Mode.and.  
returns.to.normal.operation.  
Line.up.your.remotes.(that.you’re.learning.from).in.front.of.the.Learning.  
remote,.on.a.hard.surface.approx..1.inch.apart.  
18  
 
Clearing Commands  
To Clear all Learned Commands under a mode  
Clearing.learned.commands.is.helpful.if,.for.example,.you.replace.your.  
CD.player.with.another.brand.or.model..If.you.had.learned.a.feature.  
from.your.old.CD.player’s.original.remote.on.to.this.remote.(such.as.  
RANDOM.PLAY),.that.feature.would.no.longer.work.for.your.new.CD.  
player..Should.you.wish.to.remove.or.clear.one.or.more.“learned”.  
commands,.follow.the.steps.below:  
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.  
about.3.seconds),.then.release.the SETUP.button.  
2.. Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.  
displayed..Press.and.release.OK..MODE.LEARN.is.displayed.  
3.. Press.the.down.navigation.button.until.MODE.CLEAR.is.displayed..Press.  
and.release.OK.  
4.. MODE.KEY?.is.displayed..Press.and.release.the.desired.Mode.button.  
(TV,.VCR,.DVD,.etc.).  
5.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.  
6.. PLEASE.WAIT.is.briefly.displayed.followed.by.SUCCESS.and.the.remote.  
exits.Setup.Mode.and.returns.to.normal.operation.  
Master Clear - To Clear all Learned Commands under all modes  
(recommended on first time Learning)  
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.  
about.3.seconds),.then.release.the SETUP.button.  
2.. Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.  
displayed..Press.and.release.OK..MODE.LEARN.is.displayed.  
3.. Press.the.down.navigation.button.repeatedly.until.ALL.LEARN.CLEAR.  
is.displayed..Press.and.release.OK.  
4.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.  
5.. PLEASE.WAIT.is.briefly.displayed.followed.by.SUCCESS.and.the.remote.  
exits.Setup.Mode.and.returns.to.normal.operation.  
19  
 
Troubleshooting  
Remote does not operate your product.  
•.Press.the.mode.button.of.the.product.you.want.to.control.  
•.Program.the.remote.with.a.new.code.  
•.Install.new.batteries..(You.might.have.to.reprogram.your.remote.after.  
installing.new.batteries.)  
•.Remote.may.not.be.compatible.with.your.product.  
Remote does not operate some features of your product.  
•.Program.remote.with.a.new.code.  
•.Remote.may.not.be.able.to.operate.all.features.of.your.product.or.  
button.names.might.be.different.than.your.product.  
Lost Your Codes?  
Should.you.lose.your.codes.or.programming.instructions,.you.can.find.  
available.on.our.website:  
www.jascoproducts.com  
This device complies with part 15 of the FCC rules. Operation is  
subject to the following two conditions: (1) this device may not  
cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause  
undesired operation.  
FCC NOTE: The manufacturer is not responsible for any radio or  
TV interference caused by unauthorized modifications to this  
equipment. Such modifications could void the user’s authority to  
operate the equipment.  
90 Day Limited Warranty  
Jasco.Products.Company.warrants.this.product.to.be.free.from.  
manufacturing.defects.for.a.period.of.ninety.days.from.the.original.  
date.of.consumer.purchase..This.warranty.is.limited.to.the.repair.or.  
replacement.of.this.product.only.and.does.not.extend.to.consequential.  
or.incidental.damage.to.other.products.that.may.be.used.with.this.  
unit..This.warranty.is.in.lieu.of.all.other.warranties.express.or.implied..  
Some.states.do.not.allow.limitations.on.how.long.an.implied.warranty.  
lasts.or.permit.the.exclusion.or.limitation.of.incidental.or.consequential.  
damages,.so.the.above.limitations.may.not.apply.to.you..This.warranty.  
gives.you.specific.rights,.and.you.may.also.have.other.rights.which.vary.  
from.state.to.state..If.unit.should.prove.defective.within.the.warranty.  
period,.return.prepaid.with.dated.proof.of.purchase.to:  
Jasco.Products.Company  
10.E..Memorial.Road  
Oklahoma.City,.OK.73114-2205  
20  
 
24999  
Universal Remote  
Instruction Manual  
Jasco.Products.Company  
10.E..Memorial.Road  
Oklahoma.City,.OK.73114-2205  
24999-12/10  
Made.in.China.  
.
21  
 

Edimax Technology Switch 5 8 Ports Desktop User Manual
Everpure Water System EV9256 17 User Manual
Excell Precision Scale High Precesion Counting Scale User Manual
Fisher Price Bouncy Seat B8786 User Manual
Fujitsu Printer FTP 631MCL101 User Manual
Gaggenau Oven EB 204 205 User Manual
Garmin Cell Phone 20x 30 User Manual
GE Cooktop JGP656 User Manual
GE Dishwasher GLD4408 User Manual
Gentek Smoke Alarm 9120 User Manual