Fujitsu Scanner fi 4010CU User Manual

Connect the USB cable, ADF cable, and power cable  
Quick Installation Guide  
4
Before connecting the scanner, be sure to turn off the PC and  
the scanner.  
Caution  
Refer to the "fi-4010CU Image Scanner Operator's Guide" when you would  
like to know more about the scanner.  
Refer to the "Scanner Utility for Microsoft Windows User's Guide" on the  
Scanner driver CD-ROM when you would like to know more detailed information  
about the FUJITSUTWAIN32 Scanner driver installation.  
Carefully read the "fi-4010CU Image Scanner  
Operator's Guide" before using this product.  
Particularly read and understand the "Safety Precautions"  
before using this product.  
R
R
1. Insert smaller connector of the USB cable(the one with a core) to the USB conector  
USB connector  
ADF cable connector  
on the back side of the scanner.  
2. Connect the other end of the USB cable to the PC.  
ADF cable  
3. Connect the ADF cable to the ADF cable connector of the scanner, and fix the thumb  
screws of the ADF cable connector.  
4. Connect the power cable to the AC adapter and connect the AC adapter to the AC  
Check the scanner and accessories  
AC adaptor connector  
1
adapter connector of the scanner.  
5. Insert the power cable to the power outlet.  
Confirm that all of the following items are included.  
Power cable  
USB cable  
Connect to your PC.  
Connect to the power outlet.  
Document stopper  
ADF paper chute A  
Pad ASY  
ADF paper chute B  
USB cable  
Scanner  
Adobe R Acrobat R 5.0  
CD-ROM  
Manual CD-ROM  
fi-4010CU Image Scanner  
Operator's Guide  
Install FUJITSU TWAIN32 Scanner driver  
WindowsR 98, WindowsR Me, WindowsR 2000, WindowsRXP  
5
AC cable  
AC adapter  
fi-4010CU Quick Installation Guide  
Scanner driver CD-ROM  
Be sure to install the TWAIN data source after installing the mini-driver.  
Caution  
If the old version of FUJITSU TWAIN32 Scanner driver has been installed on your personal computer, refer to the  
2
"Scanner Utility for MicrosoftR WindowsR User's Guide" on the Scanner driver CD-ROM, and update the mini-driver.  
Release the Shipping Lock  
The WindowsR XP screen samples are shown below. The screen  
and operations will differ slightly depending on the OS that is being  
used.  
Lock  
Shipping Lock  
4. Insert the Scanner driver CD-ROM  
When automatic start has been set, the "SETUP DISK  
1. Raise the scanner carefully upward so that bottom side of  
Slide the Shipping Lock to "Unlock"  
position.  
the scanner faces towards you.  
Preparation  
Caution  
START UP SCREEN" is displayed.To close this screen,  
click the [Exit] button on this screen.  
2. Slide the lock switch to "Unlock" position to release the  
Confirm that the Scanner is connected to your personal computer  
with the USB cable.  
lock.  
5. Select "Find the most suitable  
driver in the next location".  
Check "Include the next  
location" then specify  
Installing the mini-driver  
1. Turn on the power by pushing the power switch in the back of the  
scanner.  
D:\Driver2 (When your CD-  
ROM is the D drive). After that  
click [Next].  
The power lamp lights.  
2. Turn on your personal computer and log on to WindowsR.  
When using WindowsR 2000 or WindowsR XP log on as an  
administrator . The "Found New Hardware Wizard" dialog box is  
displayed.  
Unlock  
For WindowsR 98, just check "Specify search location" then specify  
D:\Driver2 (When your CD-ROM is the D drive). After that click  
[Next].  
3. Check "Install from list or  
specified location", then click  
[Next].  
For WindowsR Me, select "Find the most suitable driver for the  
device being used" then click [Next]. Check "Specify search location"  
then specify D:\Driver2 (When your CD-ROM is the D drive). After  
that click [Next].  
Attach the ADF paper chute and Document stopper  
3
Flip out part  
ADF paper chute B  
Document stopper  
1. Attach the ADF paper chute A to the ADF unit so that the side guide of the  
For WindowsR 2000, just check "Specify location" and then in the  
next screen specify "Copy source for origination file" then specify  
D:\Driver2 (When your CD-ROM is the D drive), then click [OK].  
ADF paper chute faces up.  
2.Attach the ADF paper chute B to the ADF paper chute A so that the flip out of  
For WindowsR Me check "Specify the driver location", then click  
[Next].  
part of the ADF paper chute B faces up.  
For WindowsR 2000 and WindowsR 98, clicking on [Next] the select  
search method screen is displayed.  
3.Insert the clows of the document stopper into the slots of the scanner. Slide the  
• For WindowsR 98 select "Find the most suitable driver for the  
device being used" then click [Next].  
document stopper in the direction of the arrow marked on it to fix the stopper.  
• For WindowsR 2000 select "Find the most suitable driver for the  
device" then click [Next].  
ADF paper chute A  
Continued on next page  
 
P3PC-E117-01EN  

Fellowes Chipper S701cm P70cm User Manual
Fisher Price Dollhouse W1383 User Manual
Fisher Price Tablet Accessory 74243 User Manual
Freestyle Watch 798 User Manual
GE Cordless Telephone 16223870 User Manual
GE Dishwasher 165D4700P388 User Manual
Gefen Switch Monitor Switcher User Manual
GE Intercom System 25210 User Manual
GE Microwave Oven JEB1095 User Manual
GE Ventilation Hood PVB37 User Manual