Fellowes Paper Shredder 420CC User Manual

POWERSHRED  
®
OPERATING INSTRUCTIONS  
NOTICE D'UTILISATION  
MANUAL DEL PROPIETARIO  
BETRIEBSANLEITUNG  
420  
420CC  
420HS  
1.209.999.100 – Edition 08/99  
 
420  
420 CC  
420 HS  
Paper shredder  
Contents  
Page  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
Important Safety Instructions .................................................................................. 4  
Parts Identification .................................................................................................. 4  
Technical Specifications ......................................................................................... 5  
Supplies .................................................................................................................. 6  
Installation .............................................................................................................. 6  
Caution ................................................................................................................... 6  
Operation ................................................................................................................ 6  
Checklist for Inoperative Machine .......................................................................... 7  
Malfunctions ........................................................................................................... 7  
10. Maintenance ........................................................................................................... 7  
11. Warranty ................................................................................................................. 8  
12. Customer Service ................................................................................................... 8  
Edition 08/99  
1.209.999.100  
3
USA  
 
420  
420 CC  
420 HS  
Paper shredder  
2. Parts Identification  
1. Important Safety Instructions  
1. Read all instructions before use.  
2. Save these instructions for later use.  
1
2
3
3. Follow all warnings and instructions marked on  
the product.  
4. Unplug this product from the wall outlet before  
cleaning. Cleanwith a damp cloth using a mild  
soap and water solution. (Do not use abrasives  
or petroleum based cleaners.)  
4
8
Fellowes Manufacturing Co.  
1789 Norwood Avenue  
Itasca, IL 60143 USA  
R
Model:  
Serial #:  
Voltage:  
Current:  
Motor:  
Manufactured:  
R
R
5. Place this product as close as possible to  
power source for quick and easy unplugging.  
6. Do not use this product near water.  
7. This product should never be placed near or  
over a radiator or heat source.  
5
6
8. Operate from the type power source indicated  
on the marking label. If you are not sure of the  
type of power available, consult your dealer or  
local electricity board.  
7
9. Do not allow anything to rest on the power cord.  
Do not place this product where people may  
walk on the cord.  
10. If an extension cord is used with this product,  
make sure that the total of the ampere ratings  
on the products plugged into the extension cord  
do not exceed the extension cord ampere  
rating. Also, make sure that the total of all  
products plugged into the wall outlet does not  
exceed 15 amps.  
11. Do not attempt to service this product yourself,  
as opening or removing covers may expose  
you to dangerous live parts or other risks.  
12. Unplug this product and refer servicing to  
qualified personnel under the following  
conditions:  
420  
420 CC  
420 HS  
1. LED display  
2. Rocker switch  
3. Cover  
5. Caution label  
6. Cabinet  
7. Cabinet access door  
8. Paper feed opening  
4. Serial label  
A) When the power cord or plug is damaged or  
frayed.  
B) If liquid has been spilled on the product.  
C) If the product has been exposed to rain.  
D) If the product does not operate normally when  
the operating instructions are followed.  
E) If the product has been dropped or the casing  
has been damaged.  
13. Keep out of the reach of children.  
14. This shredder should be operated only with an  
operator in attendance.  
4
1.209.999.100  
USA  
Edition 08/99  
 
420  
420 CC  
420 HS  
Paper shredder  
3. Technical Specifications  
Model  
420  
Model  
420 CC  
Model  
420 HS  
Cutting Style  
Strip Cut  
High Security  
Cross Cut  
Cross Cut  
Shred Size  
5/32"  
1/4"  
(5.8mm)  
5/32" x 1 1/2"  
(3.9 x 40mm)  
1/16" x 5/8"  
(1.9 x 15mm)  
1/32" x 7/16"  
(0.78 x 11mm)  
(3.9mm)  
Security rating (DIN 32757)  
2
2
3
4
5
*Sheet capacity 8 1/2" x 11" - 20 lb.  
(A4, 70g/m2 -16 lb.)  
20  
25  
16  
10  
7
(28)  
(34)  
(22)  
(15)  
(9)  
Speed - 115 volt 60Hz units  
- 220/240 volt 50Hz units  
24,8 FPM  
26,6 FPM  
26,6 FPM  
(126 mm/sec)  
(135 mm/sec)  
(135 mm/sec)  
Entry width  
11 13/16"  
(300 mm)  
Motor power  
4/3 H.P.  
(1150 W)  
Input voltage (Depending on country)  
100V 50/60Hz  
115V 60Hz  
220/240V 50Hz  
Dimensions  
19 11/16" x 16 17/32" x 35 7/32"  
(500 x 420 x 895 mm)  
Weight  
92 lbs (42 kg)  
99 lbs (45 kg)  
105 lbs (48 kg)  
Waste container volume  
26.4 gallons (100 liters)  
Noise level  
- In Idle 56dB  
- Under load 62dB strip cuts and 70dB cross cuts  
Edition 08/99  
1.209.999.100  
USA  
5
 
420  
420 CC  
420 HS  
Paper shredder  
4. Supplies  
7. Operation  
Bags for cut material  
(Packed in dispenser carton, 50 or 100 bags  
Read operating instructions before  
putting shredder into operation  
to a roll depending on size. Contact Fellowes  
or your local Fellowes dealer for the stock  
number of the bag that fits your machine.)  
Cutting block oil for cross-cut units  
Stock # 35250  
Insert plug in power outlet  
Install waste bag for shredded material  
– Open front door and completely remove  
bag frame from cabinet  
5. Installation  
– Fold new bag around frame.  
Allow bag to overhang frame by  
approximately 7" (20 cm).  
– Slide frame with bag back into cabinet  
– Close cabinet door.  
Refer to separate set–up instructions for proper  
assembly  
Operate this product only from the type of  
power source indicated on the marking label  
Install the paper shredder so that the plug is  
easily accessible  
Before start-up  
Shredder must be operated only in upright  
position  
– Undo the wing screws securing the unit  
during transportation  
Set up paper shredder so that the ventilation  
slots are unobstructed. To ensure sufficient  
ventilation of the shredder a minimum distance  
of 4" (10 cm) to the wall or to the furniture must  
be maintained.  
6. Caution  
Never insert hand, fingers or any  
foreign objects into the feed  
opening.  
Switching equipment ON  
Serious injury may result.  
– Press rocker switch to pos. 1  
1
Keep all loose articles of  
clothing, ties, jewelery, long hair  
or other loose objects away from  
feed opening.  
Switch locks in "on" position  
Equipment is ready for operation  
(stand by)  
Green LED lights  
Injury may result.  
– Feed paper  
Always turn off and unplug the  
machine before moving,  
servicing, cleaning or any other  
conduct other than normal  
operation.  
The shredding process is started by  
photo–cells in the paper feed opening.  
Insert paper and shredding begins  
automatically.  
When the shredding is complete, the  
cutting system automatically stops  
after approx. 3 sec.  
Serious injury may result.  
Switching equipment OFF  
– Press rocker switch to pos. 3  
Switch resets to center position and the  
3
machine is turned off.  
6
1.209.999.100  
USA  
Edition 08/99  
 
420  
420 CC  
420 HS  
Paper shredder  
Motor Overheating  
Red LED lights  
8. Checklist for Inoperative Machine  
If the equipment does not work properly,  
please check the following points first:  
– Paper shredder switches off automati-  
cally.  
Is the plug inserted?  
Is the switch turned on?  
Is the cabinet door closed?  
Is waste receptacle full?  
Empty waste bag.  
Is there a paper jam in the shredder?  
Is the motor overheated?  
Switch machine off and allow motor to  
cool down for approximately 15–20 min.  
• Press rocker switch to center position  
(2).  
2
• Allow shredder to cool down for  
approximately 15-20 minutes.  
1
• Return switch to "on" position (1)  
and continue shredding.  
If none of the above applies and the equipment stil  
does not run, please contact our customer service  
department.  
Cabinet door ajar / bag full  
Red LED lights  
– Paper shredder switches off automati-  
cally.  
9. Malfunctions  
•Press rocker switch to center position  
(2).  
2
Paper jam  
• Make sure cabinet door is properly  
closed and/or empty waste bag.  
Red LED lights  
• Press rocker switch to center position  
(2) to stop the cutting system  
1
• Return switch to "on" position (1) and  
continue shredding.  
2
• Press and hold down rocker switch in  
pos. 3 to reverse the cutting system  
and back out jammed material  
3
10. Maintenance  
(paper is pushed out)  
(Cross cut unit only)  
Caution!  
Do not attempt to force the jammed  
material through the machine by  
alternating the cutting system between  
forward and reverse  
1
– When shredding capacity drops or the  
noise increases  
• Spray special cutting block oil onto  
cutting system  
3
• Remove excess paper  
1
3
• Run cutting system forward and  
backward several times without feeding  
paper  
• Return switch to pos. 1 and continue  
shredding in smaller quantities so as  
not to jam the machine further  
1
• Continue shredding  
Note:  
The 420 HS will not run forward again  
unless the jammed material has been  
completely removed from the throat  
Edition 08/99  
1.209.999.100  
USA  
7
 
420  
420 CC  
420 HS  
Paper shredder  
11. Warranty  
12. Customer Service  
FELLOWES® POWERSHRED LIMITED  
WARRANTY  
United States  
Fellowes Manufacturing Co.  
1789 Norwood Avenue  
Itasca, IL 60143  
1 year on all parts and labor  
Tel.: 1-800-955-0959  
5 years parts and labor on cutting cylinders  
Canada  
Fellowes® warrants this product to be free from  
defects in material and workmanship for a  
period of one year from the date of purchase by  
the original consumer. At it's option, Fellowes®  
will repair or replace without charge for material  
or labor, any component found to be defective  
during the warranty period. Additionally, the  
cutting cylinders are warranted for 5 years from  
the original purchase date and will be replaced  
without charge for material or labor if found by  
Fellowes® to be defective.  
Fellowes Manufacturing of Canada Ltd.  
2750 John Street  
Markham, Ontario L3R 2W4  
Tel.: 1-800-665-4339  
United Kingdom  
Fellowes Manufacturing UK Ltd.  
Doncaster Road  
Kirk Sandall  
Doncaster, South Yorkshire DN3 1HT  
Tel.: 01302-885 331  
Warranty Exclusions  
Australia  
Fellowes Manufacturing (Australia) Pty.Ltd.  
10 Fellowes Court  
Tullamarine, Victoria 3043  
The parties agree that the buyer's sole and  
exclusive remedy against Fellowes® shall be for  
the repair or replacement of defective parts as  
provided herein. The buyer agrees that no  
other remedy (including, but not limited to,  
incidental or consequential damages for lost  
profits, lost sales, injury to property or any other  
incidental or consequential loss) shall be  
available to him. This warranty shall NOT apply  
and is void under the following circumstances:  
1. When this product or any part thereof has been  
subjected to accident, alteration, abuse, or  
misuse.  
Tel.: (03) 9330-3211 in Melbourne  
1-800-331-177 outside Melbourne  
Nederland  
Fellowes  
P.O. Box 180  
4130 Ed Vianen  
Nederland  
Tel.: 0347-377988  
Germany  
2. When the original Model and Serial Number  
Plate has been altered, effaced or removed.  
3. When repair or service covered under this  
warranty (other than routine maintenance  
(as described in the Owner's Manual) has been  
performed by personnel without the express  
written consent of Fellowes®.  
Fellowes GmbH  
Dieselstraße 27  
D-30827 Garbsen  
Tel.: 05131-49770  
France  
Fellowes Lynx S.A.  
194 allée de la Croix des Hormes  
69250 Montanay  
4. When the product has been used pursuant to  
any verbal or written rental, lease or loan  
agreement.  
Tel.: 33-72-08-25-50  
THIS WARRANTY DESCRIBED HEREIN SHALL  
BE IN LIEU OF ANY OTHER WARRANTY,  
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT  
LIMITED TO, ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE. ANY REPRESENTA-  
TIONS OR PROMISES INCONSISTENT WITH OR  
IN ADDITION TO THIS WARRANTY ARE  
UNAUTHORIZED AND SHALL NOT BE BINDING  
UPON FELLOWES.  
8
1.209.999.100  
USA  
Edition 08/99  
 

Computer Tech Link Computer Monitor CTL 5fln User Manual
Craftsman Pole Saw 31679246 User Manual
Crock Pot Slow Cooker Double Dipper User Manual
Danby Dishwasher DDW399W User Manual
Dixon Lawn Mower SPEEDZTR User Manual
Dukane Projector 8755J RJ User Manual
Escient Home Theater System SE D1 User Manual
ETA Systems Oxygen Equipment FC01 LQ User Manual
Gateway Flat Panel Television 30 inch LCD TV User Manual
GE Monogram Oven ZSC2000CWW User Manual