Bogen Car Speaker WB1EZ User Manual

Easy Design Speaker

Model WB1EZ

Speaker Layout

Figure 1

The layout of the speakers should be planned prior to

installation. Because wall baffle speakers are designed to

project forward, it is best to aim them in the same direc-

tion, as this provides for both greater coverage and clarity.

You can use the building’s roof pillars or other available

supports for mounting the wall baffles. In some cases, it

may be necessary to mount the wall baffles on opposing

walls. In these cases, the speakers will project sound in

opposing directions.

START

SPEAKER

10’

20’

HALLWAY/ROOM - Wall baffle speakers work well

with rooms and hallways that are 20’ to 60’ wide. Layout

starts at one end of the hallway or room.The first speak-

er should be installed 10’ from the end of the hallway or

room. The next speaker on that wall should be installed

20’ from the first speaker, as should any additional speak-

ers required to cover the length of the hallway or room.

WALL

Figure 2

The first speaker on the opposing wall should be installed

20’ from the end of the hallway or room, thereby stagger-

ing the speakers. Each additional speaker should also be

installed 20’ apart from the previous one. See Figure 1.

START

A=10 feet

B=20 feet

OPEN AREA - The number of speakers needed to cover an

open area and the layout of those speakers is contingent upon

the availability of suitable mounting points in the area to be cov-

ered.

Layout starts in one corner of the room. The first speak-

er should be installed 10’ from the wall with each addi-

tional speaker in the first row installed in increments of 20’

from the first. Based on Figure 2, install the next row of

speakers 30’ from the first row and 20’ from the wall with

increments of 20’ between each speaker. The third row

would follow the example of the first and each additional

row would continue this pattern of alternating rows until

the whole area is covered.

SPEAKER