JVC Camcorder Accessories WR DVXU User Manual

For GR-DVX  
Digital Video Camera  
Mounting method and operating method for  
each part  
1. Remove the four buckles on the marine case and open  
the front lid.  
WR-DVXU  
Marine Case  
User’s Manual  
2. Remove the camcorder hand strap or grip strap.  
ENGLISH  
3. Open the LCD monitor, then insert the camcorder into  
the marine case.  
Names of the parts  
4. Position so that the power  
dial projection in the  
marine case pushes the  
lock button located on the  
camcorder power dial.  
1
2
2
3
5. Turn the marine case  
power dial to the left to  
move the camcorder  
A
power dial to the “ ”  
position.  
6. Place the included anti-  
fogging silica gel in the  
gap between the  
4
5
6
camcorder and the marine  
case to prevent fogging in  
2
the marine case.  
1
3
7. Before sealing the marine  
case, check that there is no  
sand, dirt, or other foreign  
matter on the O-ring  
1 ..........Marine case front lid  
2 ..........Buckle  
mounted on the front lid or on the O-ring contact  
surface on the main unit.  
Also make sure that the inserted silica gel bag is not  
pinched. If you dive with foreign matter trapped in  
these areas, water will leak.  
3 ..........Power dial  
4 ..........START/STOP button  
5 ..........Zoom lever  
8. Check that the O-ring on the front lid is correctly  
mounted in the groove, then press in the front lid.  
Flip down the four buckles in the directions indicated  
by the arrows in the figure on the right to seal the  
marine case.  
6 ..........SNAPSHOT button  
Please read before use.  
9. Press the START/STOP  
button once to start  
This marine case is a precision instrument designed  
to permit safe video recording under high water  
pressure. Please pay careful attention when handling  
the unit before and after use, as explained in this  
users manual.  
Each part of the marine case has been subject to  
strict controls during the manufacturing process, and  
the individual functions have faced stringent tests  
during the assembly process. Each marine case has  
also had to pass water-proof inspections using high-  
pressure water testers. However, damage can some-  
times occur during transport and distribution, or  
during storage after purchase, so before diving  
always carry out the following pre-use test to verify  
safety.  
recording from the  
camcorder ( in the figure  
1
on the right). Press the  
button again to stop  
recording ( in the figure  
1
on the right).  
10.The zoom can be adjusted  
with the zoom lever ( in  
2
the figure on the right).  
11. It is possible to take a snapshot using the SNAPSHOT  
button ( in the figure on the right).  
3
12.When you are finished  
shooting, turn the power  
dial to the right to switch  
the camcorder power dial  
4
to the Off position ( in  
4
Pre-use test  
the figure on the right).  
When using the marine case for the first time after pur-  
chase, or after it has been in storage for a long time, dive  
to the usage depth with only the empty marine case  
(without mounting the camcorder inside), and test for  
water leaks.  
LYT0002-0Q9A  
 

Insignia MP3 Player NS 2V17 NS 4V17 User Manual
Intel Computer Hardware S5500HCV User Manual
IOGear Switch GHPB42 User Manual
ioSafe Computer Drive eSATA USB 20 User Manual
Jenn Air Double Oven W10160641A User Manual
Jenn Air Refrigerator JCD2295KE User Manual
JVC CRT Television AV29BF10EPS User Manual
JVC DVD Recorder DR M150SEK User Manual
JVC Speaker SX LT55U User Manual
Jwin Bluetooth Headset JB TH220 User Manual